Balancing calculation
One- to four-plane workflows calculate correction mass and angular position from measured influence.
Measurement and calculation
Balanset-1A software
Vibration measurement, correction calculation and reporting. Current software windows and connection requirements.
Manual review: 8 September 2026
Direct answer
What does the Balanset software do?
It records vibration and phase, calculates correction mass and angle from trial runs, displays overall and 1× vibration plus FFT spectra, and stores sessions for reports or repeat work.
Before installing the current software
The local 2.3.7.0 manual specifies Windows 7/8/10/11, a USB connection and measurement-unit firmware 5.5.0 or newer. Check the versions in the main window before updating. A laptop is not included with the instrument.
Modern and classic balancing forms are selected in F4 Settings. Both use the same initial/trial/verification sequence. Balanset-1A is limited to two channels and two correction planes.
Amplitude and phase
Track overall and rotational-frequency vibration together with the phase reference.
FFT spectrum
Inspect frequency content before assuming the dominant fault is imbalance.
Polar presentation
See amplitude and phase as a vector for easier interpretation of rotor response.
Archive and repeat work
Store sessions and reuse controlled influence data for identical production rotors.
Reports
Keep measured values and balancing results for maintenance records and handover.
Actual interface
Measurement, calculation and diagnosis
All six windows below come from the manual. The numbers on screen are examples of the interface, not results promised for your machine.
Technical library
Keep the relevant guidance at hand
Selection support
Not sure which system fits your machine?
Just write what machine you have — a fan, a crusher, a pump, anything that rotates. Our engineers will take it from there and confirm the right setup before you order.